The New URAR Form Explained: A Field-by-Field Breakdown for Appraisers
At a Glance
Do You Feel UAD 3.6 Ready?
According to a survey by Appraisal Buzz, 68% appraisers in the survey panel had already completed some form of UAD 3.6 training and only 26% felt well-prepared.
More than two-thirds trained yet only one in four ready.
The problem isn’t willingness; it’s that training and operational readiness are two different things. You can watch every walkthrough available and still not know what your workflow actually feels like until you’re inside a live UAD 3.6 report with a closing date attached. The friction doesn’t show up in a webinar; it shows up when you’re mid-report and realize the format you opened was wrong, or your condition ratings don’t align, or your software isn’t generating the submission package UCDP expects.
Here’s what’s actually catching appraisers off guard and what every appraiser must know before the transition deadline.
1. Your First Live UAD 3.6 Report Will Take Longer Than You Think
The first several reports take noticeably longer. Appraisers already testing UAD appraisal forms during Broad Production are reporting the same thing: more fields, more structured data, and more validation checks slow down your progress.
Expect it to feel slow at first as you learn where every new field goes. Here’s why:
- Learning curve: The new appraisal forms have 29 sections in total. New fields mean more data to gather at the property: room-level condition ratings, expanded site data, level-by-level GLA breakdowns. You’ll spend extra time verifying entries you’d normally do on autopilot.
- Data accuracy: Every detail now goes in a defined field (square footage, room count, condition ratings, etc.). Early on you’ll be verifying each entry carefully since any mistake here forces a revision.
- Built-in checks: Software enforces the rules now. For example, TOTAL autoruns a full E&O check on UAD 3.6 reports at sign-off and will block completion if any issues are found.
Most appraisers are worried about the change, but the curve does flatten. That efficiency comes from repetition, not reading and the worst time to run your first UAD 3.6 report would be when a lender sends you one in September with a two-week turn time. Run a practice report now, on a property you know well, before it costs you on a real file.
Refer to our field-by-field breakdown of the new URAR for more help here.
2. Starting a Report in the Wrong Format Means Starting Over
Between now and November 2, you’ll be running UAD 2.6 and UAD 3.6 appraisal orders at the same time. 97% of appraisers surveyed confirmed they’ll be managing both formats through the transition.
Here’s what most don’t realize until it happens:
- No conversions: A completed UAD appraisal form in 3.6 cannot be converted to 2.6, and vice versa. Start in the wrong format, get halfway through and realize it’s wrong? You start over from scratch.
- Confirm format with the client: The order instructions should specify which URAR version is required. If it’s unclear, ask your lender or AMC before you begin. Fixing the wrong form after the fact causes major delays.
- Know the delivery differences: Remember that UAD 3.6 reports go out as a ZIP package (XML data + PDF + images), not a single PDF/ENV file. Make sure your client’s systems and your software are ready to handle the new format before submission.
One more thing: the overlap doesn’t end cleanly on November 2. UAD 2.6 reports already submitted before the deadline can still be revised until May 3, 2027. You’ll have legacy files in your pipeline alongside new 3.6 orders well into next year.
3. The System Will Flag Errors Your Reviewer Never Did
This is the one that surprises even experienced appraisers.
One of the GSEs’ core goals with the uniform appraisal dataset 3.6 was to make reports machine-readable and that means small mistakes a human reviewer might have passed over will now be caught automatically, before a human ever sees the report.
- Structured data = strict rules: Every answer has a specific field and in practice, any mismatch or missing detail now triggers a validation error that software won’t ignore.
- Automated QC tools: Fannie Mae and Freddie Mac offer a UAD Compliance API that checks completeness, format, and reasonableness of every field. Run pre-submission checks to catch issues before they reach UCDP.
- UCDP feedback: As November approaches, the portal will actively surface Warning and Fatal messages on UAD 2.6 submissions and reject non-compliant 3.6 reports outright; don’t ignore early warnings.
- Your condition ratings are a chain: Every rating you assign early in the report is a commitment you carry through to reconciliation. The data needs to tell one consistent story to not be flagged.
4. The Habits That Worked Under 2.6 Will Get You Flagged Under 3.6
Many appraisers have been doing this for decades and they’ve built workflows inside a system that had flexibility baked in: condition ratings that didn’t perfectly match the narrative, adjustment support absorbed by a general addendum, loose descriptions that a seasoned reviewer could interpret with context.
The new UAD appraisal forms don’t work that way. There’s no reviewer filling in context at the validation stage. The report is a structured dataset first, a PDF second.
- Context-specific comments: The old General Addendum is gone, and all analysis and explanations now have to go in the relevant section fields. If you used to dump narrative at the end, you’ll need to relocate that text into the specific section fields (Sales Comparison, Reconciliation, etc.).
- Condition/Quality split: You now give separate interior and exterior ratings, not one overall grade. Make sure both fields are filled (and then reconciled). Leaving gaps here will get flagged.
- New sections: Disaster Mitigation, Broadband availability, energy features, ADUs – these didn’t exist on the 1004. If they apply to the property and you skip them, it reads as missing data.
- Detailed comps: The new URAR has an “Additional Sales Analyzed” section where you must list comps you considered but didn’t use and explain why. Old habits of only listing final sales (or skipping this) aren’t enough. Be ready to fill in that section fully.
- Precise entries: UAD 3.6 minimizes free text. Many fields now use dropdowns or standardized lists. “Good” or “fair” won’t work, you must pick the nearest approved value or provide a precise explanation in the correct field.
The appraisers most likely to struggle during the transition probably won’t be the least experienced. They’ll be the ones trying to force old workflows into a much more structured reporting environment.
5. Your ANSI Measurements Need to Be Airtight Before You Submit
Under the new UAD appraisal form, ANSI Z compliance is built into the report’s structure, not just recommended practice. Fannie Mae and Freddie Mac have both adopted ANSI as the measurement standard.
Here’s what you must know before you submit the report:
- Round to whole feet: Report GLA to the nearest whole square foot (no decimals) per ANSI Z765. Include stairwell area on the appropriate level (ANSI says the upper level). In other words, do your math exactly as ANSI requires since anything else will trigger a check.
- Non-ANSI areas: Any finished area that doesn’t meet ANSI height must go in the “finished non-GLA area” field with an explanation. Under 2.6 you might have lumped these in, but 3.6 forces you to classify them correctly and failing to do so will create a data mismatch.
- Consistent sketch and form: Label levels per ANSI (e.g. “First level,” “Lower level” by grade exposure) and ensure your sketch calculations match your form entries. Automated QC will compare your sketch totals to the data you enter, so double-check your numbers.
- Double-check all dimensions: Since the new report computes area by level and by room, even small measurement errors, such as a missing closet, a half-foot on a wall, will cause a mismatch. Use precise tools or apps to avoid this.
This matters most on Cape Cods, story-and-a-half homes, finished walkouts, and attic conversions, basically anywhere the 7-foot ceiling rule creates ambiguity. Under 2.6, a reviewer could read your reasoning. Under 3.6, the system checks your numbers.
Conclusion
November 2 is a date you can put in your calendar. What’s harder to plan for is the months between now and then.
Before anything else: look at your process, not just your software. Not all platforms will handle this transition the same way. You need to ask your vendor specifically whether you can create a UAD 3.6 report, submit it to UCDP, and receive it back in the correct ZIP format. Announced support and verified, submission-ready support are not the same thing.
Then look at your inspection workflow, your measurement habits, your rating consistency. That’s where real preparation happens.
Ready to start with Connect?
Frequently Asked Questions (FAQs)
What is the new UAD appraisal form and how is it different from the 1004?
The new UAD appraisal form is a single dynamic Uniform Residential Appraisal Report (URAR) that replaces all legacy forms — including the 1004, 1073, and 1025 — under UAD 3.6. Unlike the static 1004, the new URAR adapts based on property type, runs 25–30 pages, and is submitted as a ZIP file. It becomes mandatory for all GSE submissions on November 2, 2026.
What are the new appraisal forms replacing under UAD 3.6?
All legacy UAD appraisal forms are permanently retired on November 2, 2026 — including Forms 1004, 1073, 1025, 2055, 70, 465, and 442, and all hybrid and exterior-only variants. The single dynamic URAR replaces every one of them.
What is the UAD 3.6 transition deadline for appraisers?
The hard mandatory deadline is November 2, 2026. Warning messages for UAD 2.6 submissions begin appearing in UCDP from August 6, 2026. UAD 2.6 reports already submitted can still be revised until May 3, 2027, but no new submissions will be accepted after November 2.
How does the uniform appraisal dataset 3.6 affect daily appraisal workflow?
The uniform appraisal dataset 3.6 changes how appraisal data is collected, validated, and delivered — not the valuation itself. Appraisers must complete room-level condition ratings, level-by-level GLA breakdowns per ANSI Z765, and structured site data fields. Reports are submitted as a ZIP file. Cross-field validation runs automatically before UCDP submission.
What happens if you start a UAD appraisal form in the wrong format?
A completed UAD 3.6 report cannot be converted to UAD 2.6 and vice versa. Starting in the wrong format means beginning the report from scratch. Always confirm the required format with your client before opening the file.